The ARP Synthesiser company was started by the engineer and musical enthusiast Alan Robert Pearlman – hence ‘ARP’ – in 1970 in Lexington, Massachusetts, USA. Previous to ARP, Pearlman had worked as an engineer at NASA and ran his own company Nexus Research laboratory Inc., a manufacturer of op-amps (precision circuits used in amplifiers and test equipment) which he sold in 1967 to fund the launch of the ARP company in 1969. The inspiration for ARP came after he played with both Moog and Buchla synthesisers and being unimpressed by the tuning instability of the oscillators and lack of commercial focus – especially the keyboardless Buchla Box – and became determined to produce a stable, friendly, commercial electronic instrument.1Trevor Pinch, Frank Trocco, (2004) Analog Days: The Invention and Impact of the Moog Synthesizer, Harvard University Press.
“If you would like to spend your time creatively, actively producing new music and sound, rather than fighting your way through a nest of cords, a maze of distracting apparatus, you’ll find the ARP uniquely efficient . . . matrix switch interconnection for patching without patch cords…P.S. The oscillators stay in tune.”
ARP Advert 1970
The companies first product was the ARP 2500, a large monophonic modular voltage-controlled synthesiser designed along similar lines to the Moog Modular series 100. The 2500 had a main cabinet holding up to 12 modules and two wing-extension adding another six modules each. The interface was designed to be as clear as possible to non-synthesists with a logically laid out front panel and, unlike the Buchla and Moog Modular, dispensed with patch cables in favour of a series of 10X10 slider matrices, leaving the front panel clear of cable clutter. The 2500 also came with a 10-step analogue sequencer far in advance of any other modular system of the day
Despite the fact that the 2500 proved to be an advanced, reliable and user-friendly machine with much more stable and superior oscillators to the Moog, it was not commercially successful, selling only approximately 100 units.
Modules of the ARP 2500 2Peter Forrest, (1994) The A-Z of Analogue Synthesizers, Susurreal Publishing, Devon, England
|Module #||Type of Module||Description|
|1003||dual envelope generator||This module contains two ADSR envelope generators (actually labeled “Attack”, “Initial Decay”, “Sustain”, and “Final Decay”), each switchable between single or multiple triggering. There is a manual gate button as well as a front panel input for gate/trigger and a back panel input for a sustain pedal.|
|1003a||dual envelope generator||(same as 1003, except re-positioned trigger switches and gate buttons)|
|1004||VCO||A Voltage Controlled Oscillator with a range from 0.03Hz to 16kHz, this module can function as a VCO or an LFO. It features separate outputs for each of its five waveforms (sine, triangle, square, sawtooth, and pulse) and 6 CV (control voltage) inputs, as well as a CV input for Pulse Width Modulation.|
|1004p||VCO||This module is the same as the 1004, except each waveform has its own attenuation knob for mixing all the waveforms together. There is a separate output to for the mixed waveforms.|
|1004r||VCO||This module is the same as the 1004, except each waveform has its own rocker switch to route any or all of the waveforms to an extra mix output.|
|1004t||VCO||This module is the same as the 1004r, except it uses toggle switches.|
|1005||VCA andRing Modulator||This module is half Voltage Controlled Amplifier and half Balanced (Ring) Modulator. It is switchable between linear or exponential voltage control, and features 11 inputs, 3 outputs, and illuminated push-buttons.|
|1006||VCF and VCA||The Voltage Controlled Filter (24dB/octave, low-pass, with resonance) and Voltage Controlled Amplifier (switchable between linear and exponential) in one module|
|1012||Convenience Module||This module routes two jack inputs to any of the upper ten lines of the lower matrix. (Remember, most of the patching for this instrument is done from these matrix sliders).|
|1016||dual noise generators||This module features two random voltage generators outputting white or pink noise and two slow sample-and-hold circuits, four outputs in all.|
|1023||dual VCO||Both oscillators feature the same waveforms as 1004 with a switch for high and low frequency ranges. There are a total of 10 control inputs and 2 audio outputs.|
|1026||Preset Voltage module||This module contains eight manually or sequencer-driven gated control-voltages, each with two knobs sending control voltages to separate outputs. It can be connected, via the rear panel, to module 1027 Sequencer or module 1050 Mix-Sequencer.|
|1027||Sequencer||This is a 10X3 sequencer with 14 outputs (including 10 separate position/step gates), 6 inputs, buttons for step and reset, and a knobs for pulse repetition/width, which controls the silence between the steps.|
|1033||Dual Delayed-Trigger Envelope Generator||This module is the same as the 1003 ADSR module except it has two more knobs to control gate delay.|
|1036||Sample-and-Hold / random voltage|
|1045||Voice Module||This all-in-one module contains a VCO, VCF, VCA, and two ADSR envelope generators, as well as 16 inputs, and four outputs. (Note: Most modules feature a spelling mistake “Resanance” instead of “Resonance”.)|
|1046||quad envelope generator||This module is basically a 1003 and a 1033 combined into one module.|
|1047||Multimode Filter / Resonator||This module features 15 inputs, 4 outputs and an overload warning light.|
|1050||Mix-Sequencer||This module features two 4X1 mixers with illuminated on/off buttons.|
|3001||Keyboard||This keyboard features a 5-octave, 61-note (C-C) keyboard with the bottom two octaves (C-B) reverse colored to show the keyboard split. The top half of the keyboard is duophonic. There are separate CV (1v/octave), gate, and trigger outputs for each side of the split, as well as separate panels on either side of the keyboard with controls for portamento, tuning, and pitch interval.|
|?||Dual-Manual Keyboard||Two 3001s, one on top of the other, with the bottom octave (C-B) or two octaves (C-B) of the top keyboard reverse colored to show the split.|
The ARP 2600 (1971)
The ARP 2600 was designed to be a commercially viable portable, semi-modular analog subtractive synthesiser with built in modules i.e. a versatile but not-too-complicated synthesiser, targeted at the educational market; schools, universities and so-on. The inbuilt modules could be patched using a combination of patch cables or by using sliders to control internally hard wired connections:
“ARP 2600 The ultimate professional-quality portable synthesizer Equally at home in the electronic music studio or on stage, the ARP 2600 provides the incredible new sounds in today’s leading rock bands The 2600 is also owned by many of the most prestigious universities and music schools in the world Powerful. dependable, and easy to play. the 2600 can be played without patchcords or modified with patch cords. This arrangement provides maximum speed and convenience for live performance applications, as well as total programming flexibility for teaching, research composition and recording. An pre-wired patch connection(s) can be overridden by simply inserting a patchcord into the appropriate jack on the front panel.
The ARP 2600 is easily expanded and can be used with the ARP 2500 series.Renowned for its electronic superiority, the oscillators and filters in the 2600 are the most stable and accurate available anywhere Accompanied by the comprehensive, fully illustrated owner s manual, the ARP 2600 is recognized as the finest, most complete portable synthesizer made today
3 Voltage Controlled Oscillators 03 Hz to 20 KHz in two ranges Five waveforms include: variable-width pulse. triangle. sine, square, and sawtooth
1 Voltage Controlled Lowpass filter Variable resonance, DC coupled. Doubles as a low distortion sine oscillator.
1 Voltage Controlled Amplifier Exponential and linear control response characteristics
1 Ring Modulator. AC or DC coupled
2 Envelope Generators.
1 Envelope Follower.
1 Random Noise Generator. Output continuously variable from flat to -6db/octave
1 Electronic Switch, bidirectional
1 Sample & Hold with internal clock.
1 General purpose Mixer and Panpot.
1 Voltage Processor with variable lag.
2 Voltage Processors with inverters
1 Reverberation unit. Twin uncorrelated stereo outputs
2 Built-in monitoring amplifiers and speakers, with standard stereo 8-ohm headphone jack.
1 Microphone Preamp with adjustable gain
1 Four-octave keyboard with variable tuning. variable portamento, variable tone interval, and precision memory circuit.
DIMENSIONS: Console 32″ x 18″ x 9x Keyboard 35″ x 10″ x 6″ WEIGHT: 58 Ibs” 3ARP 2600 Promotional material 1971
ARP 2800 ‘Odyssey’ 1972
By the mid-1970s ARP had become the dominant synthesiser manufacturer, with a 40 percent share of the $25 million market. This was due to Pearlman’s gift for publicity – the ARP2500 famously starred in the film ‘Close Encounters of the Third Kind’ (1977) as well as product endorsements by famous rock starts; Stevie Wonder, Pete Townsend, Herbie Hanckock and so-on – and the advent of reliable, simpler, commercial instrument designs such as the ARP 2800 ‘Odyssey’ in 1972.
The ARP 2800 ‘Odyssey’ 1972-1981
The Odyssey was ARP’s response to Moog’s ‘Minimoog’; a portable, user-friendly, affordable performance synthesiser; essentially a scaled down version of the 2600 with built in keyboard – a form that was to dominate the synthesiser market for the next twenty years or so.
The Odyssey was equipped with two oscillators and was one of the first synthesisers to have duo-phonic capabilities. Unlike the 2600 there were no patch ports, instead all of the modules were hard wired and routable and controllable via sliders and button son the front panel. ‘Modules’ consisted of two Voltage Controlled Oscillators (switchable between sawtooth, square, and pulse waveforms) a resonant low-pass filter, a non-resonant high-pass filter, Ring Modulator, noise generator (pink/white) ADSR and AR envelopes, a triangle and square wave LFO, and a sample-and-hold function. The later Version III model had a variable expression keyboard allowing flattening or sharpening of the pitch and the addition of vibrato depending on key pressure and position.4Mark Vail, (2000), Vintage Synthesizers: Pioneering Designers, Groundbreaking Instruments, Collecting Tips, Mutants of Technology, 2000 by Backbeat Books.
ARP Production model timeline 1969-1981:
- 1969 – ARP 2002 Almost identical to the ARP 2500, except that the upper switch matrix had 10 buses instead of 20.
- 1970 – ARP 2500
- 1970 – ARP Soloist (small, portable, monophonic preset, aftertouch sensitive synthesizer)
- 1971 – ARP 2600
- 1972 – ARP Odyssey
- 1972 – ARP Pro Soloist (small, portable, monophonic preset, aftertouch sensitive synthesizer – updated version of Soloist)
- 1974 – ARP String Ensemble (polyphonic string voice keyboard manufactured by Solina)
- 1974 – ARP Explorer (small, portable, monophonic preset, programmable sounds)
- 1975 – ARP Little Brother (monophonic expander module)
- 1975 – ARP Omni (polyphonic string synthesiser )
- 1975 – ARP Axxe (pre-patched single oscillator analog synthesiser)
- 1975 – ARP String Synthesiser (a combination of the String Ensemble and the Explorer)
- 1977 – ARP Pro/DGX (small, portable, monophonic preset, aftertouch sensitive synthesiser – updated version of Pro Soloist)
- 1977 – ARP Omni-2 (polyphonic string synthesiser with rudimentary polyphonic synthesiser functions – updated version of Omni)
- 1977 – ARP Avatar (an Odyssey module fitted with a guitar pitch controller)
- 1978 – ARP Quadra (4 microprocessor-controlled analog synthesisers in one)
- 1979 – ARP Sequencer (analog music sequencer)
- 1979 – ARP Quartet (polyphonic orchestral synthesiser not manufacted by ARP – just bought in from Siel and rebadged )
- 1980 – ARP Solus (pre-patched analog monophonic synthesiser)
- 1981 – ARP Chroma (microprocessor controlled analog polyphonic synthesiser – sold to CBS/Rhodes when ARP closed)
The demise of ARP Instruments was brought about by disorganised management and the decision to invest heavily in a guitar style synthesiser, the ARP Avatar. Although this was an innovative and groundbreaking instrument it failed to sell and ARP were never able to recoup the development costs. ARP filed for bankruptcy in 1981.5and fall of ARP instruments’ By Craig R. Waters with Jim Aikin
- 1Trevor Pinch, Frank Trocco, (2004) Analog Days: The Invention and Impact of the Moog Synthesizer, Harvard University Press.
- 2Peter Forrest, (1994) The A-Z of Analogue Synthesizers, Susurreal Publishing, Devon, England
- 3ARP 2600 Promotional material 1971
- 4Mark Vail, (2000), Vintage Synthesizers: Pioneering Designers, Groundbreaking Instruments, Collecting Tips, Mutants of Technology, 2000 by Backbeat Books.
- 5and fall of ARP instruments’ By Craig R. Waters with Jim Aikin